PEL® BHR
Cost economical declension of PEL BH technology,increasing Greasing Interval ( >500 hours ), Good Abrasion Resistance, high Load Capacity (150MPa)
Material Properties
- Type: Metallic
- Water Absorption (24h): 0%
- Housing: h7 (0.000984 in)
- Shaft Tolerances: f7 (ISO 286 standard)
- Optimal Shaft Roughness: Ra < 0.8 µm (Ra < 32 µin)
Temp. Ratings
- Low Temp: -40°C (-40 °F)
- Max Temp: 250°C (482°F)
- CTE: 1.2 E-5 /°K (6.67E-06 /°F)
Performance Limits
- Dynamic Load: 150 N/mm2 (21,756psi)
- Max Speed: 1.5 m/s (4.92 ft/s)
Applications
Recommended applications include, but are not limited to the following:
- Agriculture Equipment
- Attachments
- Construction Equipment
- Earth Moving Equipment
- Excavators
- Grapples
- Mining Equipment
- Ploughs
- Wheel Loaders
Industries
This bushing is a popular solution for the following industries:
- Agriculture
- Construction
- Forestry
- Handling
- Mining
- Railway
- Steel
Advantages
Advantages include, but are not limited to the following:
- Abrasion Resistant
- High Load Capacity
- Increased Lubrication Interval