PEL®-BH
PEL BH bushings are machined bearings with excellent resistance to wear and seizure due to the combination of a duplex surface treatment and special grease cavities / reservoirs.
They are extremely useful in harsh working conditions: high pressure, corrosion, abrasion, shocks. With these bearings the intervals of lubrication are increased significantly leading to reduced maintenance. Due to recent developments, PEL BH2 bushings offer improved wear resistance.
PEL BH technology is also available on spherical plain bearing in case of angular misalignment or flexion in the joint.
Mating Shaft:
For optimal performances of the joint, the surface roughness should be inferior to Ra 0.8 μm and the hardness should be superior to 56 HRC. For optimal performances, special shafts are available from HEF DURFERRIT: PEL ST, PEL STC.
Material Properties
- Type: Metallic
- Water Absorption (24h): 0%
- Housing: h7 (0.000984 in)
- Shaft Tolerances: f7 (ISO 286 standard)
- Optimal Shaft Roughness: Ra < 0.8 µm (Ra < 32 µin)
Temp. Ratings
- Low Temp: -40°C (-40 °F)
- Max Temp: 250°C (482°F)
- CTE: 1.2 E-5 /°K (6.67E-06 /°F)
Performance Limits
- Dynamic Load: 200 N/mm2 (29,008psi)
- Max Speed: 1.5 m/s (4.92 ft/s)
Applications
Recommended applications include, but are not limited to the following:
- Agriculture Equipment
- Attachments
- Construction Equipment
- Earth Moving Equipment
- Excavators
- Grapples
- Mining Equipment
- Ploughs
- Wheel Loaders
Industries
This bushing is a popular solution for the following industries:
- Agriculture
- Construction
- Forestry
- Handling
- Mining
- Railway
- Steel
Advantages
Advantages include, but are not limited to the following:
- Abrasion Resistant
- High Load Capacity
- Increased Lubrication Interval